If you own a Jeep with remote start capabilities, you know how convenient it can be to start your vehicle from a distance. This feature allows you to pre-condition your vehicle, ensuring that it is at a comfortable temperature before you even step inside. However, there may be times when you encounter a message that says “remote start disabled start vehicle to reset jeep.” This can be frustrating, especially if you are in a hurry or need to warm up your Jeep quickly.
The purpose of the remote start system in a Jeep is to allow you to start your vehicle’s engine remotely, without having to physically be inside the vehicle. This feature is particularly useful in extreme weather conditions, as it allows you to pre-condition your vehicle’s interior temperature before you even step inside. Typically, remote start is activated using a key fob or a smartphone app, depending on the Jeep model.
If you encounter a message that says “remote start disabled start vehicle to reset jeep,” there are a few possible explanations. This message may indicate that your Jeep’s hazard lights are active, your remote’s batteries are dead or installed incorrectly, or that your vehicle is not in “Park.” Other possible causes include a faulty hood sensor or switch, low or dead fob battery, or a low vehicle battery. In the following section, we will explore some common troubleshooting steps that can help you get your remote start system working again.
Causes of the “Remote Start Disabled” Message
If you are experiencing the “Remote Start Disabled” message on your Jeep Grand Cherokee, there could be a variety of reasons why the system is not functioning correctly. In this section, we will explore some of the most common causes of this message.
Safety System Issues
One of the most common reasons why the remote start system may be disabled is due to safety system issues. Jeep Grand Cherokees are equipped with several safety features that can prevent the remote start system from functioning correctly. Some of these safety features include:
- An open door, trunk, or hood
- The gear selector is not in Park
- The parking brake is not engaged
- Low battery voltage
- Engine overheating
If any of these safety systems are not functioning correctly, the remote start system will be disabled. Therefore, it is important to ensure that all safety systems are in good working order before attempting to use the remote start system.
Temporary System Glitch
Another reason why the remote start system may be disabled is due to a temporary system glitch. Sometimes, the system may experience a minor software glitch that can cause the system to malfunction. If this is the case, you may be able to reset the system by starting the vehicle manually and then attempting to use the remote start system once again.
More Serious Problems
In some cases, the “Remote Start Disabled” message may indicate a more serious underlying problem that requires dealer attention. For example, a sensor malfunction or a faulty remote start module could be causing the issue. If you have tried all of the troubleshooting steps and the remote start system is still not functioning correctly, it may be time to take your Jeep Grand Cherokee to the dealer for further inspection.
Troubleshooting Steps Before a Dealer Visit
If you encounter the “Remote Start Disabled, Start Vehicle to Reset” message on your Jeep, there are a few things you can try before taking your vehicle to the dealer. Here are some troubleshooting steps that may help you solve the issue:
Follow the Jeep Warning Message
The message itself provides the solution – start your vehicle as you normally would using the key or push-button ignition. This can potentially reset the system and allow the remote start to work again.
Ensure All Doors, Hood, and Trunk Are Closed
Double-check that all doors, the hood, and the trunk are securely closed. This is important as safety interlock requirements may prevent the remote start from working if any of these components are not properly closed.
Shift to Park and Engage Parking Brake
Make sure the gear selector is in Park and the parking brake is engaged before attempting to use the remote start. These are common safety triggers that may prevent the system from working.
Try Remote Start Again After a Few Minutes
If the above steps do not work, try waiting a few minutes after starting the vehicle and then attempting remote start again. This may give the system enough time to reset and allow the remote start to work.
When to See a Jeep Dealer
If you’ve followed the troubleshooting steps for a “Remote Start Disabled” message and the problem persists, it may be time to seek professional help. Here are some situations where a dealer visit is recommended:
Persistent “Disabled” Message
If the “Remote Start Disabled” message persists even after turning off the hazard lights, checking batteries, and putting the car in “Park,” it’s time to seek professional help. A Jeep dealer can diagnose the issue and perform any necessary repairs to get your remote start feature working again.
Remote Start Fails After Starting Vehicle
If you’ve started your Jeep manually as instructed and remote start functionality remains disabled, it’s time to visit a dealer. They can inspect the vehicle and diagnose any underlying issues that may be preventing the remote start feature from functioning properly.
Concern About Underlying Issues
If you suspect that your Jeep has an underlying issue (e.g., unusual battery drain) that may be affecting the remote start feature, it’s best to have it inspected by a dealer. They can diagnose the problem and perform any necessary repairs to ensure that your Jeep is functioning properly.
Additional Tips for Reliable Remote Start
Consult Your Jeep Owner’s Manual
To ensure that you have a clear understanding of how your specific Jeep model’s remote start system operates and how to troubleshoot any issues that may arise, it is recommended that you refer to your owner’s manual. This will provide you with detailed information on how to use the remote start feature, as well as any specific steps you may need to take if you encounter any problems.
Maintain Battery Health
Maintaining a healthy battery is essential for reliable remote start function. Regularly scheduled battery checks and replacements are recommended to ensure that your battery is in good condition and can provide the necessary power to operate the remote start system. Additionally, it is important to avoid leaving electrical accessories on when parked for extended periods, as this can drain the battery and affect remote start performance.
Remote Start Range Limitations
It is important to keep in mind that remote start functionality can be affected by a variety of factors, including distance from the vehicle and signal interference. While remote start systems are designed to work over a certain range, this range may be limited in certain situations. For example, if you are parked in an area with a lot of signal interference, such as a crowded parking lot, you may experience reduced remote start range. Similarly, if you are parked far away from your vehicle, you may need to be closer to the vehicle to successfully start it using the remote start feature. By keeping these limitations in mind, you can ensure that you are using your remote start system effectively and reliably.
Conclusion: Keeping Your Jeep’s Remote Start in Top Shape
A functioning remote start system can add an extra level of comfort and convenience to your driving experience. If you’re experiencing issues with your Jeep’s remote start, don’t worry. There are a few simple troubleshooting steps you can take to get it back up and running.
First, check the basics. Ensure that your Jeep is in “Park,” your hood is closed properly, and your remote’s batteries are not dead or incorrectly installed. If these checks don’t solve the issue, consult your owner’s manual for further troubleshooting steps.
If you’re still experiencing issues after attempting these steps, it’s best to seek assistance from your Jeep dealer. They have the expertise and tools necessary to diagnose and fix persistent issues.
To keep your Jeep’s remote start system in top shape, it’s important to maintain good vehicle health. Regular maintenance, such as oil changes and tire rotations, can help ensure optimal performance. Additionally, consulting your owner’s manual and following recommended maintenance schedules can help prevent issues from arising in the first place.
By following these simple steps and maintaining good vehicle health, you can enjoy the added comfort and convenience of a functioning remote start system in your Jeep.
Related Posts:
